Just Shoot Me Products Blog

JSMP Welcomes 2A Gear

2008-08-10T12:35:00.002-04:00

JSMP welcomes new dealer 2A Gear, located in Adairsville, GA.

Customer Satisfaction

2008-07-30T00:28:00.002-04:00

I just received my order of the Beginner 2 Ground Unit, and it looks great. I can’t wait to start blasting away. If it wasn’t 95 degrees outside, I’d go this afternoon! I placed my order yesterday at 8:00am. It’s 2:00pm the next day, and it’s here. Less than 30 hours later. My Mon-Fri job is purchasing for a large construction company. If half of my vendors delivered their products as well as you guys, my job would be so much easier. I can’t wait to go shooting, and I can’t wait to order from you guys again! Keep doing what you are doing, your company is the model of what a business should be!

Gregg H
Leitchfield, Kentucky

Register To Vote, Or Register Your Guns

2008-07-12T13:39:00.001-04:00

Register to vote, or register your guns! With the 2008 campaign already well underway, it is critical that gun owners and gun rights supporters are registered to vote in advance of respective deadlines. Make no mistake, opponents of our freedom will be working hard over this next year to gain momentum they need to attack our rights. It is critical that we as gun owners are registered to vote and that we most assuredly vote on Election Day.

To assist you in registering to vote this year, NRA-ILA has a number of tools available.

Protect your Second Amendment Rights by exercising your right to vote!

- Jeff

Rare Victory!

2008-07-07T13:44:00.001-04:00

Welcome to the 6th installment of The JSMP Weekly.

With so many shooting ranges across the nation under attack from encroachment (land developers) and environmentalists, it was a pleasant surprise when a judge recently ruled in favor of the Metacon Gun Club, in Simsbury, Conn., in a lawsuit that threatened to close the range. A local environmental group had tried to shut down Metacon because of claims the range was “unreasonably polluting or impairing the air, water, soil, and other natural resources of the state.” Superior Court Judge William T. Cremins said in his decision; “Based on the more credible evidence, the court finds that the plaintiff has not met its burden of proof and therefore finds for the defendant without cost.”

It’s great to see the judicial system working correctly!

See Ya Next Week,

- Jeff

A Special Thank You

2008-07-06T18:34:00.004-04:00

I would like to thank Scott L. Maxwell of the 3rd Squadron 73rd Cavalry Regiment serving in Scania, Iraq for his thoughtfulness. Our thoughts and prayers are with you and the paratroopers.

Thanks Again,

- Jeff

A Satisfied Customer

2008-07-05T14:12:00.007-04:00

Hello:

I purchased two of your ART targets a few weeks ago. I was looking at your targets on the web and wasn’t sure which targets I needed. I called your customer service number for help on deciding which targets would work for me. I shoot 45 pistol, 223 rifle and shotgun. I spoke with Gary and he was a big help. His advice not only got me the right target, but it saved me money. We had the chance to use them yesterday and I am very satisfied and impressed! The ART balls are great. We were shooting them up the backstop and they would roll back to us. We could keep them rolling non stop until out of ammo. I’m not sure, but we used up about 1500 to 2000 rounds of ammo between all of us and the ART targets weren’t hurt at all. We were even using deer slugs. We had a great time with your targets. Thanks Gary.

A Satisfied Customer,

Jason, C.

Mesa, AZ

Happy July 4th

2008-07-04T00:01:00.002-04:00

We would like to wish you and your family a happy and safe July 4th!

- Jeff

Remington Arms Receives Grants

2008-06-30T14:37:00.002-04:00

Welcome to the 5th installment of The JSMP Weekly.

Remington Arms located in Ilion, NY recently received two grants totaling $3 million dollars from the New York State Senate and another from the Empire State Development Corp. It is amazing how a depressed economy can change one’s mind about gun manufacturers.

Remington will add $10 million to expand the Ilion facility and add 100 new jobs. However, I think that calling the jobs "new" is a bit questionable... In January, Remington purchased H&R Firearms Co., of Gardner, MA. The "new" jobs are actually being transferred from there. Bear in mind, Remington is owned by Cerberus Capital Management, L.P.

I think consolidation leads to less competition, less consumer choices and higher consumer prices. New York state Sen. James L. Steward said “ This truly will have a ripple effect.” Let’s hope it is for the better and not the worse.

See Ya Next Week,

- Jeff

Using the Correct Adhesive/Thread Locker Can Prevent Damage

2008-06-29T13:40:00.000-04:00

We have all used epoxy or a Loctite product to fasten a mating part on to a weapon. We apply a couple of drops to the threads and tighten away. However, when installing critical parts such as Bi Lock Mount for a suppressor (pictured below) we suggest following the instructions completely.

We recommend using Flexbar Rocksett Ceramic Adhesive when attaching threaded components to the muzzle of barrels, because of the extreme temperatures experienced during use. Rocksett Ceramic Adhesive will withstand temperatures up to approximately 2,000 degrees Fahrenheit without breaking down. No epoxy or Loctite product will withstand these temperature extremes. Rocsett Adhesive is available from MSC Supply (1-800-645-7270). Using the correct adhesive or thread locker can prevent damage to a weapon and possible bodily injury.

- Jeff

Great American Past-Time

2008-06-28T15:55:00.002-04:00

I coached girls softball for 20 plus years. What was I to do, I had 4 daughters? Now that I'm retired, I attend my grand-daughter's (Shelbi) games as a spectator and love it. Seeing Shelbi full of energy and competitiveness brings back a lot of good memories of her mother and aunts. Shelbi's mother, Kelly, was an awesome catcher. Her aunt Jessie was a pitcher with an outstanding record. Aunt Emily still holds the record for stolen bases. Aunt Ellen had the best eye of any batter there ever was! She still holds the record for most walks in a season. Shelbi is following the foot steps of some local softball legends! I think she may surpass them all in time.

- Papaw

Paper Target Add-Ons

2008-06-27T17:39:00.004-04:00

H-Bar Talk: Part 3

Our H-Bar Target Stand modular design lets you easily add a paper target holder so you can print your weapon on a paper target. First, remove the hare-pin clip from the cross rod and remove the cross rod from the uprights. The Paper Target Add-On can then slide easily over either the right or left upright of the H-Bar frame. Then insert the cross rod back into one of the holes located on the uprights, slide on the reactive targets, push the cross rod thru the other hole on the opposite upright and thru the corresponding holes located on the paper target add-on. Then replace the hare-pin clips. You can now shoot paper targets or reactive targets with one target unit.

The paper target add-on is available in two sizes. The AC-002 Paper Target Add-On measures 20” in height with 10” of adjustment. This allows you to set the center of mass of the target at 36” to 46” from the ground up.

The AC-003 Paper Target Add-On measures 30” inches in height with 10” inches of adjustment. This allows you to set the center of mass of the target at 46” to 56” from the ground up.

Supreme Court Strikes Down DC Gun Ban

2008-06-26T13:25:00.000-04:00

Supreme Court strikes down DC Gun Ban! Ruling acknowledges that the Second Amendment guarantees a fundamental right to protect ourselves in our homes!

Just Shoot Me Products Blog

JSMP Welcomes 2A Gear

Customer Satisfaction

Register To Vote, Or Register Your Guns

Rare Victory!

A Special Thank You

A Satisfied Customer

Happy July 4th

Remington Arms Receives Grants

Using the Correct Adhesive/Thread Locker Can Prevent Damage

Great American Past-Time

Paper Target Add-Ons

Supreme Court Strikes Down DC Gun Ban

Recommended Safe Distance

4-H Announces Fun Day Event Date

JSMP Salutes South Carolina Governor

Grandson's Birthday

JSMP Welcomes Applied Tactical Technologies

Gun Videos

Public School Educators Fall Behind

Happy Father's Day

4-H Round Robin Has Record Participants

Number of Females Hunters Increase

Indiana One-Day Getaway

Cerberus Capital Management's Impact on the Firearm Industry

JSMP Dealer Titan Armament

Local Economic News

Montgomery County Shooting Complex

U.S. Cavalry

Big Daddy’s Outdoors

JSMP Visits Fort Campbell

Memorial Day

Welcome Race Fans!

JSMP Dealer Cheaper Than Dirt

Can I shoot the Prairie Dog Target with Rifle Calibers?

JSMP Dealer in Australia

Pendleton County Sheriff's Department Trains with JSMP Targets

Interchangeable Reactive Targets

Shooting Sports Beginner

Civil War Days at Conner Prairie

Armed Forces Day

H-Bar Target Stands Offer Versatility Other Units Lack

Maximum Height of Paper Target Stands

New Jersey Dept of Emergency Preparedness Purchase JSMP Targets

Fort Bragg Request Ballistic Polymer Samples For Testing

Save Money In the Long Run

Happy Mother's Day

Pro Patria Chooses JSMP Targets for DMSP

Granddaughter’s Birthday

King/Dickens County Texas Purchase JSMP Tactical Training Targets

Weapon Storage

The JSMP Weekly Coming June 2008

A Mother's Relief

In-Home Shooting Range

Blue Mountain Gun Works Purchases JSMP Targets For Spring Shoot

Mcallen Police Department Chooses JSMP H-Bar Units For Training

MilPolice Equipment To Exhibit JSMP Targets May 4-9, 2008

JSMP Selects ArmsVault for IT Marketing Needs

Illinois State Police Enter JSMP T & E Program

Paper Target Stands Used in the Desert

4-H Shooting Sports Announces Round Robin Date

Under Lubricated/Over Lubricated

Do You Make Portable Paper Target Backers?

Prairie Dog Target Instills Confidence in Ballistic Polymer

Testing at BT Proving Grounds

Wyatt’s Spring Machine Gun Shoot a Success

Langhorne Rod and Gun Club

Range Security

What Size Paper Target Can I Use On Your Paper Target Stands

JSMP to Expand Target Line for Cowboy Shooters

How Does the Sub-Gun Target React?

1911 Auto Ambidextrous Thumb Safety

U.S. Troops to Receive Targets in Afghanistan

Wyatt's Gun's Receive Preliminary Approval

Ballistic Technologies Proving Grounds

Phosphate (Parkerized) Finishes

Which Target Would You Recommend For Pistols?

Spain Military Police Training Targets

NRA 2008 Annual Meetings & Exhibits

Wyatt's Machinegun Shoot